Dummy Carriages

Product Description

Dummy Carriages are designed to fit on to your existing forklift carriage to either increase the carriage width or to change to a smaller or larger mounting class i.e. 3-2 or 3-4.

Approximate lead time: Approx 2-3 days

Downloads

Specification Sheet (PDF)

Product Variations

Model Capacity (kg) Weight (kg) C of G (mm) LLC (mm) Price Qty
IDC-23-1000 2500 115 40 70 Call/Enquire for prices
IDC-23-1050 2500 135 40 70 Call/Enquire for prices
IDC-23-1250 2500 140 40 70 Call/Enquire for prices
IDC-23-1500 2500 145 40 70 Call/Enquire for prices
IDC-23-1800 2500 160 40 70 Call/Enquire for prices
IDC-32-1000 3000 115 40 70 Call/Enquire for prices
IDC-32-1050 3000 135 40 70 Call/Enquire for prices
IDC-32-1250 3000 140 40 70 Call/Enquire for prices
IDC-32-1500 3000 145 40 70 Call/Enquire for prices
IDC-32-1800 3000 160 40 70 Call/Enquire for prices
IDC-34-1000 5000 130 45 85 Call/Enquire for prices
IDC-34-1050 5000 140 45 85 Call/Enquire for prices
IDC-34-1250 5000 165 45 85 Call/Enquire for prices
IDC-34-1500 5000 190 45 85 Call/Enquire for prices
IDC-34-1800 5000 220 45 85 Call/Enquire for prices
IDC-43-1000 8000 130 45 85 Call/Enquire for prices
IDC-43-1050 8000 140 45 85 Call/Enquire for prices
IDC-43-1250 8000 165 45 85 Call/Enquire for prices
IDC-43-1500 8000 190 45 85 Call/Enquire for prices
IDC-43-1800 8000 220 45 85 Call/Enquire for prices

Operation

  • Remove the forks from the carriage of the Forklift truck.
  • Remove the quick release bottom hangers from the Dummy Carriage.
  • Lift the Dummy Carriage, with the aid of other mechanical means other than that of the Forklift it is intended to be fitted to, and position the top hangers of the Dummy Carriage onto the top carriage rail of the Forklift
  • Ensure that the Dummy Carriage is positioned centrally to the Forklift Carriage and then locate the single latch pin into the Forklift Carriage Castellation.
  • Fit the two quick release hangers to the underside of the Forklift’s bottom carriage rail ensuring that the safety clips are correctly fitted.
  • The unit is now ready for use.

Maintenance

  • The Dummy Carriage should be inspected weekly for general condition with particular attention paid to: A – All weld points, B – Any damaged/worn components
  • Damage or failure must be reported and rectified immediately prior to re-use of the attachment.
  • General surface rusting especially in the critical areas should be treated with proprietary inhibitors, primers and paint on a regular basis.
  • This product is certified for six (6) months from the date of manufacture after which it is the customer’s responsibility to have the product re-tested at an approved testing facility or inspected and logged in a register by a competent person as advised by the HSE.

Health & Safety

  • The manager of the department or section where the attachment is to be used must be responsible for ensuring the operators are fully conversant with the attachment, its operation and maintenance.
  • Ensure both the truck and attachments are capable of handling the intended load and its contents.
  • Do not shock load the attachment under any circumstances.
  • Only use with the quick release bottom hangers correctly fitted and the latch pin securely fitted in place.

    Standard Features

  • Central location peg to ensure correct fitment
  • Quick release bottom hangers supplied as standard
  • Painted matt black